How do I connect my WYZE camera to a new Wi-Fi?
In the Wyze app, tap Home. Tap the plus sign + on the top left, then Add Device > Cameras. Tap on your camera version. Follow the on-screen prompts to set up your camera again.
How do I reset my WYZE camera network?
Hold down the setup button for 5-10 seconds. Wait for a solid or blinking yellow light (red for Wyze Cam v3). Wait for the reset process to be completed. It can take 5 minutes.
Can I have Wyze cameras on different Wi-Fi networks?
Yes! Since network information is used by the device itself instead of being associated account-side, you can set up Wyze devices across multiple networks with no trouble. This means that you can have your Wyze Sense paired with a Wyze Cam at home and have a Wyze Cam on a different network at your office.
How do I change my Wi-Fi on my Wyze lock?
Open the Wyze app. Tap the Gateway’s listing on the Home tab. Tap the. Press the Update WiFi Information button near the bottom of the page, at which point your Gateway’s status light should start flashing Blue/Red. When prompted, select your local 2.4GHz WiFi network, then enter the network password.
Why is my Wyze camera not connecting to new Wi-Fi?
If your Wyze Cam Pan is not connecting, power cycle the device, check the status of the network and ensure to connect to a 2.4 GHz network. You could also try resetting the Wi-Fi password to something simpler and disabling any network filters, IP masks, or VPNs. Factory resetting the Wyze camera could also work.
How do I change my Wyze camera from offline to online?
Try power cycling your camera by unplugging for about 30 seconds and plugging it back in. Reboot your router. Try a factory reset, and attempt set up as a new device: Remove the SD card if there is one inserted.
How do I reset my network camera?
Disconnect the power adapter. Press and hold the Reset button on the board whilereconnecting the power. Keep the reset button pressed for about 2 seconds then release.
How do I reset my WYZE Cam v3 network?
Can I reset my WYZE camera remotely?
You can power cycle your Wyze Camera remotely using the companion app you can install on your Android or iPhone. The power cycling process for your Wyze Camera remotely is simple and should take a minute or two.
What network does WYZE camera use?
Wyze Devices need to be connected to a WPA/WPA2 protocol network. It does not support WEP due to it being less secure than WPA and WPA2.