Contents
hide
How do I get my Feit camera back online?
Cycle the power Off and On. You will hear an audible tone and the status LED should blink red then to a solid blue in about 1 minute. If it does not turn blue after a minute, please go through the setup process again to reconnect to your Wi-Fi signal.
Locate the reset button atop the camera. Press and hold the reset button for 30 seconds. After releasing it, the status light located at the bottom will flash a few times indicating the camera is restarting. The camera settings are now restored to its factory defaults.
How do I reset my wired ring floodlight camera?
Locate the reset button atop the camera. Press and hold the reset button for 30 seconds. After releasing it, the status light located at the bottom will flash a few times indicating the camera is restarting. The camera settings are now restored to its factory defaults.
Why is my Feit floodlight flashing red?
If the LED is blinking red, you will need to press and hold Reset Button located behind the cover on the side of the camera (see the Resetting Unit & Accessing SD Card section). Make sure the Wi-Fi network is a 2.4GHz network, device will not connect to a 5GHz network.
How do I reset my Feit?
How do I fix Feit offline?
If the light is not already blinking rapidly, you may need to disconnect it from power and reconnect it until it flashes indicating it is in pairing mode. Follow the instructions in the Feit Electric app to connect your light.
How do I reconnect my floodlight camera?
Tap menu (≡) Tap Devices and tap your Floodlight Cam. Tap Device Health. Tap Change Network. Tap Reconnect, then choose Movement or Setup Button. Tap Continue and follow the prompts in the app to reconnect.
How do I reset my spotlight camera?
Reset Spotlight Cam. If your device has power, hold the setup button located at the top of the device down for 20 seconds to perform a hard reset on the device. After release, the status light on the bottom of the device should flash a few times letting you know that Spotlight Cam is restarting.
How do I reset my CCTV camera?
How do I manually reset my Ring camera?
To factory reset your Ring Camera: Locate the orange reset button on the back side of the camera. Press and hold the reset button for 15 seconds. After releasing it, the status light located on the back will flash a few times indicating the camera is restarting.