Contents
hide
How do you reset a Blink camera that is already registered?
Step 1: Press and hold the reset button on the side of the Sync Module until the LED blinks red. Step 2: Release the button and wait for the LED to blink green and blue. Step 3: The Sync Module is now in set up mode. Step 4: Delete the Sync Module from your Blink app.
How do I unregister a device from Blink?
From the Home screen, tap Settings to view system settings. Tap Device and System Settings. Tap the name of the system you wish to delete. From the System screen, tap Delete System, and then tap DELETE in the confirmation popup.
How do I Unattach my Blink camera?
To remove the back cover and open the camera With the tool inserted into the slot, apply side pressure on the tool and gently pry the cover loose. As shown in the illustration, hold the camera on its side with one hand while you pull with the other hand.
How do I disable one of my Blink cameras?
To turn off a Blink Camera without the Blink app, remove the batteries. You can also power down the sync module to which the Blink Cam is synced. Creating schedules to disarm the cam or implementing IFTTT commands to disarm the Cam via Alexa voice commands could also achieve the same result.
What if my blink camera is already registered to a different account?
Contact the person you purchased it from and ask them to unlink the device from their account. This should resolve it in most situations. Contact Blink Support to see if they can delete the old account from the unit. In this case, you may need to provide a receipt to them to prove that you purchased it from them.
How do I reset my Blink to a new network?
How do I transfer my Blink to a new owner?
How To Transfer Blink Camera To A New Owner? Blink camera can be transferred to new owner through two different methods. Delete Your Account Information From the Blink Camera App. Change the Blink App’s Email Address. You can’t link camera to account if it’s linked to another account.
How do I factory reset my Blink device?
How do I reset my Blink device?
Use a small object or fingernail to press the reset button for 5 seconds. You will see a flash of red and then after 15 seconds a blinking blue light and solid green light appear at the front of the Sync Module. The Sync Module is ready to be added through the Blink app.
How do I remove USB from Blink?
First, safely eject the USB drive. Go to the Main home screen of the Blink app and tap Sync Module. You may have to scroll down the screen if you have more than three cameras. From the Sync Module screen, tap Local Storage to reach the Local Storage screen. Tap Safe Eject USB.